Product advantages and installation instructions of industrial photo oxygen catalytic converters
Release time:
2023-04-14 09:17
Industrial photo oxygen catalytic converters use high ozone UV ultraviolet beams to decompose oxygen molecules in the air to produce free oxygen, also known as reactive oxygen species. Due to the imbalance of positive and negative electrons carried by free oxygen, it needs to combine with oxygen molecules to generate ozone.
UV+O2 → O+O * (reactive oxygen species) O+O2 → O3 (ozone), as is well known, has an oxidizing effect on substances and has an effect on foul gases and other irritating odors.
Product advantages of industrial photocatalytic converters:
1. Purification and stable operation;
2. Compact, novel, small in size, light in weight, and modular in structure design;
3. Noise less than 45db (A), wind resistance less than 300 Pa;
4. Low operating cost and low power consumption;
5. Easy maintenance and long service life;
6、Installation and instructions for industrial photo oxygen catalytic converters:
1. It can be installed before or after the fan, and it is recommended to install it before the fan;
2. If installed on a bracket, it should be securely connected to the bracket;
3. Sealing of the connection with the exhaust duct;
4. It can be installed indoors or outdoors, but there should be enough space for maintenance and repair;
5. The box should be grounded;
6. The electrical connections in the body and electric control box should be correct.
keyword:
Related News
How to prevent scale in the use of boilers
With the continuous development of society and the continuous improvement of people's living standards, boilers play an increasingly important role in people's daily lives, including power generation boilers, steam boilers in industrial boilers, bath boilers and hot water boilers in civil boilers, and various types of boilers. These boilers will encounter the danger of "scale" during use. What is scale? What are the hazards? How to prevent and govern? Next, I will provide you with a detailed explanation.
The approximate process flow of catalytic combustion equipment
Preheating: Preheating is the basic process form of catalytic combustion. The exhaust gas temperature is below 100 ℃ and the concentration is also low, so heat cannot be self-sufficient. Therefore, before entering the reactor, it needs to be heated in the preheating chamber. After combustion and purification, the gas exchanges heat with the untreated exhaust gas in the heat exchanger to recover some of the heat. This process usually uses gas or electric heating to raise the temperature to the ignition temperature required for the catalytic reaction.
Factors affecting the processing speed of UV photocatalytic equipment
What are the factors that affect the processing speed of the photo oxygen exhaust gas purifier
No. 51 Jinma Road, Yuhua District, Shijiazhuang City, Hebei Province, West America Wuzhou MOCO1403
QIGONG