Factors affecting the processing speed of UV photocatalytic equipment
Release time:
2023-04-14 09:17
What are the factors that affect the processing speed of the photo oxygen exhaust gas purifier
1. Types of exhaust gas: There are many types of exhaust gas, each with a different concentration. In high concentrations, if the photo oxygen exhaust gas purifier does not meet the requirements of the concentration range, its operation will be in an abnormal state. Some exhaust gases are acidic, such as elements such as chlorine and sulfur, which can cause corrosion to equipment and affect its normal operation.
2. Particle size of exhaust gas: The particle size of exhaust gas can also affect the operation of industrial waste gas treatment equipment. Generally, if there are oil mist particles in the exhaust gas, these particles will deposit in the equipment, which is not conducive to the normal operation of the equipment.
There are many factors that affect the processing speed of UV photo oxygen dust collectors. The type of waste gas and the size of waste gas particles are just two key influencing factors. Improper use, lack of maintenance, environment, and concentration of waste gas can all affect it. However, as long as the concentration of waste gas purified by photo oxygen dust collectors can meet the emission standards.
keyword:
Related News
How to prevent scale in the use of boilers
With the continuous development of society and the continuous improvement of people's living standards, boilers play an increasingly important role in people's daily lives, including power generation boilers, steam boilers in industrial boilers, bath boilers and hot water boilers in civil boilers, and various types of boilers. These boilers will encounter the danger of "scale" during use. What is scale? What are the hazards? How to prevent and govern? Next, I will provide you with a detailed explanation.
The approximate process flow of catalytic combustion equipment
Preheating: Preheating is the basic process form of catalytic combustion. The exhaust gas temperature is below 100 ℃ and the concentration is also low, so heat cannot be self-sufficient. Therefore, before entering the reactor, it needs to be heated in the preheating chamber. After combustion and purification, the gas exchanges heat with the untreated exhaust gas in the heat exchanger to recover some of the heat. This process usually uses gas or electric heating to raise the temperature to the ignition temperature required for the catalytic reaction.
Main components and characteristics of welding fume purifier
Welding smoke purifiers are a common type of working machine, which have a good effect on areas with welding smoke and combustible dust in the factory. The main components include: universal vacuum arm, vacuum hose
No. 51 Jinma Road, Yuhua District, Shijiazhuang City, Hebei Province, West America Wuzhou MOCO1403
QIGONG