PRODUCTS

HTC Series Large Integrated Proportional Regulating Gas Burner

The HT series integrated gas burner uses natural gas and liquefied petroleum gas as fuel, and is divided into single stage fire, double stage fire, and proportional adjustment according to the operation control mode.

keyword:

burner

Combustion equipment

Category:

HT series integrated gas burner

E-mail:

sales@xffee.com

Inquiry

HT series all-in-one gas burner adopts natural gas and LPG as fuel, and is divided into single-stage fire, double-stage fire and proportional adjustment type according to the operation control mode.

1、Single-stage fire: only one section of fire output, the operation mode is on/off type. The use of single-stage fire is generally a low-power burner.

2、Double-stage fire: there are two stages of fire power, large and small fire, according to the control of the boiler thermostat (or pressure controller) to achieve a small fire (a fire) / large fire (= fire) 1 off conversion between the operation.

3, proportional adjustment type: can achieve smooth, proportional adjustment of the combustion volume in the output range. According to the signal from the equipment temperature or pressure controller, the burner can operate at any working point in the output range to keep the balance of the system input and output load and meet the system requirements for high-precision load control.

Natural gas (NG, LNG) and liquefied petroleum gas (LPG) are used as fuels with fully automatic proportional regulation type control. Smooth and proportional adjustment of combustion output can be realized according to equipment load control, meeting the demand for high-precision load control.

It is used in large and medium-sized boilers, heating furnaces, drying and heating equipment, and other thermal energy equipment that require high-precision load control.

▪ Safe and reliable fully automatic program control

◎ Fully automatic program control operation, extended pre-purge and post-purge time can be set to ensure more safety and reliability of combustion operation control;

◎ Automatic proportional adjustment of combustion volume can be realized according to the setting of control parameters such as temperature or pressure of heat-using equipment, and external chain control can be easily realized to ensure safe operation;

◎ Adopt UV type flame detection device to achieve reliable flame detection and flame out protection to ensure safe and stable flame combustion;

◎ Equipped with gas pressure and air pressure safety protection switch, at the same time can easily achieve external chain control to ensure operational safety.

▪ Good combustion and regulation performance

◎ The proportional servo adjusting device is used to achieve fully automatic proportional adjustment of combustion volume and combustion air volume, which can ensure good combustion at any working point in the working range while achieving precise load output control;

High air pressure design and wide range of gas pressure adaptability ensure that the burner can adapt to more complex combustion conditions.

▪ Easy maintenance structure

◎ Combined assembly of burner head and flame stabilizer makes it easy to remove the internal components for maintenance;

Large burners can be provided with sliding mounting base, which makes installation and maintenance very convenient by sliding and pulling;

◎ Non-standard length combustion cylinder models can be provided upon request to meet the needs of different furnace chamber structure sizes.

Model	A	B	B1	C	C1	D	E	G	L	M
HTC300	1220	1245	520	1320	850	350	320	DN65	460	18 (M16)
HTC350	1350	1310	580	1400	920	350	360	DN65	520	18 (M16)
HTC400	1480	1310	580	1480	920	350	360	DN80	520	18 (M16)
HTC500	1550	1480	680	1575	1050	400	410	DN80	600	24 (M20)

HTC series large proportional regulating gas burner technical parameters

Model		HTC300	HTC350	HTC400	HTC500
Output power	KW	696-3480	812-4060	870-4640	1044-5800
	104Kcal/h	60-300	70-350	75-400	90-500
Control method		Automatic proportional control (accept DC4-20mA proportional signal control, other proportional signal methods can be ordered)
Applicable gas		Natural gas (NG, LNG)
Standard inlet pressure	KPa	10
	mm H20	1000
Adaptable pressure range	KPa	8-15
	mm H20	800-1500
Design fuel low calorific value	MJ/Nm3	35.53 (8500 Kcal/Nm3)
Adaptation to ambient temperature	°C	-15-60
Applicable power supply		AC380V/50Hz/3<p
Motor power	KW	5.5	5.5	7.5	11
Protection level	IP	40 （Protection level can be increased upon request）
Mounting flange form		Fixed flange (non-standard length combustion cylinder orders are acceptable)
Combustion air volume adjustment method		Synchronous servo-electric adjustment
Flame monitoring method		UV ultraviolet type
Gas inlet connection size		DN65	DN65	DN80	DN80

HTB series small and medium-sized dual section fire gas burner

HTD series low calorific value gas burner

Landline：+86-0311-87777707

Mailbox：sales@xffee.com

Address: No. 51 Jinma Road, Yuhua District, Shijiazhuang City, Hebei Province, West America Wuzhou MOCO1403